Junction box to suit Ø90 pipe pole or larger

Dynapak can connect 3 x 16mm² power supply cables incoming and 2 x 1.5 mm² output to LED luminaire. Output cable goes via the bottom or top. DynaPak will accept three DIN rail mounted accessories. Polycarbonate self-extinguishing construction. One piece front cover with tool fastening. Clear visor can be opened with a tool and is retained providing viewing of status of DIN rail mounted components e.g. ON/OFF indicator for surge protection device. Protective flexible cone, for the frontal insertion and clamping of power supply cables.

Advantages

DIN rail terminal block support removable without tools. Sliding transparent window for viewing and accessing protection components. Fixing bracket, adjustable without tools over 130 mm, with front or rear hooking.

Technical specifications

Max capacity

• Up to 2 network cables, 4x25mm².
• Up to 3 network cables, 4x16mm².
• Up to 2 LED luminaire cables, 3x2.5mm².

Casing

• Self-extinguishing polycarbonate.
• IP44 in accordance with IEC 60529 (open junction box: IP2X).
• IK08 in accordance with EN 62262.
• Class 2 (can also be supplied with insulated earth terminal).
• -40°C to +130°C.

Product standards

EN 61439-2.

Delivery:

• Pre-wired with high-temperature silicone coated wires and crimped lugs.
• Supplied with fuses, configuration labels and cable clamp.

Downloads

configuration_support_product_page_lacroix_sogexi.pdf
dynapak_product_page_lacroix_sogexi.pdf
3301_ni_en_b_junction_boxes_mounting_bracket_installation_guide_1.pdf
3300_ni_en_b_junction_boxes_installation_guide_1.pdf
3302_ni_en_a_passe-fils_tet_installation_guide_1.pdf